The progression of cleaning mould from window glasses, sills, and frames

Mould does not take a long time to be there on window glasses, sills, and frames. As long as you ignore cleaning the mould, it will be a more difficult task for you. So, regular maintenance can prevent it and keep your home healthy and bring in the fresh air through the window. Besides, it protects the aesthetic view of your house also. But lots of landlords have a terrible experience in this regard with their rental property. When any tenant moves from their place, they find out mould on the window sills, glasses, and frames.

If you also identify such condition of your windows, then you should think about window cleaning. Throughout this blog, you will make out how to clean mould from window glasses, sills, and Frames. Therefore, keep reading up to the end. 

Steps for mould cleaning 

Mould cleaning is not so big deal. But if you get help with the process and have practice in this task, then you can do perfectly. Well, the cleaning process goes through the upcoming steps.  

  • Preparation 

For this task, you need to take self-protection, and that’s why you should put on safety glasses, gloves, and face mask. Apart from these, you will need to have a spray bottle, detergent, bleach, paper towel, microfiber cloths, plastic bag, hairdryer or fan. 

  • Examine 

Now you need to examine the window and its surrounding parts to know how much area the mould-covered. Along with examining mark the section so you can easily remove the mould. 

  • Vacuum

Well, you can skip this step if the mould is not so much. But if the condition is opposed, then dry cleaning or vacuuming is important to make the next steps easier. 

  • Damp portions 

After dry clean, you need to damp the affected portions. Dipping a disposable cloth into warm water wipe around the portions you marked. Or you can simply spray warm water on the area. 

  • Apply detergent 

At this position, mix detergent with warm water in a bucket. Now wet a disposable cloth in the detergent solution and wipe off the area where mould was. You can also use a scraper if the mould is hard and then wipe up the area. 

  • Bleach 

At this step, you need to prepare a solution using bleach. Add ¼ to ½ cup of bleach with a gallon of water. Apply this solution to the affected section for 20 minutes and then rinse off the window with clean water.   

  • Prevention 

According to the condition of your window repair the damage or change some parts. Besides, allow fresh air to pass as you prefer.  

Often people don’t want to lose their costly time in cleaning windows, or they have a tight schedule every day. Is it also your reason? Well, nothing to worry, as we, Diamond Shine Window Cleaning, are here. You only need to inform us about this matter. Take your decision fast! 

Leave a Reply

Your email address will not be published. Required fields are marked *